EV Charger
Specification:
- Input: 150 – 300 VAC
- Output: 48V battery charger with max current of 55A with temperature compensation
- Battery type: Selectable through CAN/BMS – Lead Acid, Li-Ion, LiFePo4
- Input and Output Connectors – IP65, automotive grade
- Input Over Voltage, Battery reverse polarity, battery disconnect protections
| Environmental Condition | Standard / Specification |
|---|---|
| Humidity | 5% to 95% non-condensing |
| Ambient Operating temperature | -30°C to +50°C ISO 16750-4, SECTION 5.3.2 Temperature Cycle |
| Storage Temperature | -30°C to +85°C ISO 16750-4, SECTION 5.1.2 High temperature tests ISO 16750-4, SECTION 5.1.1 Low-temperature Tests |
| Thermal Shock Test | Tmin to Tmax 100 Cycles, ISO 16750-4 Section : 5.3.3 Rapid change of Temperature |
| Power Temperature Cyclic Test | As per ISO 16750-4 |
| Mechanical Shock | ISO 16750-3 Section 4.2.2 : Acceleration 500 m/s² Duration: 6 mSec; 10 Per each axis |
| Environmental Condition | Standard / Specification |
|---|---|
| Conducted Emission on Mains Port: | EN55011 Class A or B |
| Conducted Emission on CAN Port: | EN55011 Class A or B |
| Radiated broadband & narrowband Electromagnetic Emissions | IEC EN 61000-4 Electrical/electronic Subassembly - Broadband reference limits |
| Radiated susceptibility | IEC EN 61000-4-3 Immunity of electrical/electronic subassemblies to Electromagnetic Radiation 30 volts/m rms for the free field testing method in over 90 per cent of the 20 to 2,000 MHz |
| Surge | IEC EN 61000-4-5 |
| EFT / ESD | IEC EN 61000-4-4, IEC EN 61000-4-2 |
| Environmental Condition | Standard / Specification |
|---|---|
| Vibration | ISO 16750-3 Section 4.1.2.7.2 TEST-VII 10 Hz to 2000Hz for 32 Hours each Plane RMS acceleration 57.9 m/s² |
| Random Vibration | ISO 16750-3 Section 4.1.2.4.2 TEST-IV 10 Hz to 1000Hz for 8 Hours each Plane RMS acceleration 27.8 m/s² |
| Free Fall Test | ISO 16750-3 Section 3 4.3.2 Free Fall Height 1mtr, On a concrete surface or Steel Plate 2 Falls per test on opposite sides |
| Cyclic Humidity Test | ISO 16750-4 Section: 5.6 Humid heat, cyclic +55 °C to -10°C |
| Salt Spray Test | ISO 16750-4 Section: 5.5 Salt spray |